hasemsecret.blogg.se

1. #Using winfax pro with vista serial number#
2. #Using winfax pro with vista serial#
3. #Using winfax pro with vista update#
4. #Using winfax pro with vista code#

The License and Serial ID are only used for licensing. Q: Since all the switches in a stack would have the same license and serial after this procedure, would this cause issues?Ī: No - stacking works perfectly. The output of show license should be empty (unless you previously had licenses from before this guide, in which case they should now show valid). It now has the stock license ID and serial, and the licenses have been removed. #run show license again before deleting more if you're deleting multiple #once a license is deleted, the index number of remaining lics changes #replace X with the number of the license in the list you want to delete: #now delete each of my licenses (they should be the ones showing invalid) #If you have previous licenses from before this guide you want to keep: #if you had no previous licenses from before this guide:

Do not skip this! They will be invalid after changing the serial back. Once the switch reboots and has a new serial, you need to delete the licenses you loaded from this guide. Make sure the capitalization matches what is on your switch! enable Then just use the commands we used earlier, but now using your actual serial. It should be on a sticker on the bottom of the unit.

#Using winfax pro with vista serial number#

First, get the serial number from your switch. If you want to revert the switch to its original serial and license ID (for instance, if you sell it), that's quite easy.

That's it! It will come back up fully licensed with all four 10gbE ports ready to go. Write memory then reload the switch to bring the 10gbE ports out of the ERR-DIS state: write mem If you ever decide to revert the switch, the original licenses will become active again once the serial is reverted to stock. Note: If the switch had other licenses on it beforehand, they will now show as invalid - this is expected as the serial no longer matches. The Status column should show Active for both new licenses. Now make sure they imported properly: show license Replace the IPs in the commands with the IP of your own TFTP server: enableĬopy tftp license 192.168.1.8 ICX64xx/1-6450-prem.xml unit 1Ĭopy tftp license 192.168.1.8 ICX64xx/2-6450-ports.xml unit 1 Once it's booted into the OS, ensure you are hosting the firmware ZIP contents via TFTP. The switch will reboot, and when it comes back up it will have a new license ID and serial. We need to change the serial and license ID to match the new licenses. When upgraded and configured, move on to the below.

#Using winfax pro with vista update#

To do this, you need the latest firmware - this is not optional! Follow the update guide to upgrade to the latest firmware image if you haven't already - ICX6450 Update & Start Guide. IPv6 Routing - static/unicast/multicast.10gbE functionality on the remaining 2x SFP+ ports (2x come unlocked already from factory).On the Brocade ICX6450, the POD license and the PREM license in this guide unlock the following: To begin, visit the Brocade Overview page, and download the firmware ZIP - this also contains the license files.

#Using winfax pro with vista code#

Only the license code reads this value, so changing it has no negative effects. To download and use the master license files in this guide on as many switches as you need, you simply need to change your license ID to match. Thankfully these IDs are stored in a separate EEPROM and can be easily changed. Brocade licenses are keyed to a specific switch License ID, so they cannot be loaded on multiple switches.